3D modeling tool

Got a specific
application challenge?

Use our Solutions Worksheet to tell us about it.

Reach out
to stay
informed.

Register to receive email,
news and downloads

QS-7 Collision Sensor

The QS-7 is a dynamically variable collision sensor that operates on an air pressure system.

A regulated air supply provides positive, variable pressure to hold the collision sensor rigid during normal operation. At impact, the air chamber seal is opened, while the shutdown signal is immediately sent to the system controller.

Key Benefits

  • Dynamically variable trip points
  • Permanent repeatability
  • Use on linear actuators, robots, pick-and-place machines
  • Detects angular, rotational and compressive forces
Hotels Additional Product Info

 

Engineering Data

 

Performance Metric Imperial
Torque Trip Point .28-1.5 N-m 2.5-13.5 in-lb
Moment Trip Point .31-1.5 N-m 2.7-13.2 in-lb
Mass 0.11 kg 0.24 lb
Diameter 40 mm 1.6 in
Profile 27 mm 1.1 in
Compliance Angle ±5°
Axial Compliance (Z+) 1.38 mm 0.054 in
Rotary Compliance no limit
Center of Mass 11 mm .43 in
Operating Temperature 0°C min - 70°C max
Repeatability X&Y: ±0.013 mm
Z: ±0.013 mm
Rotational: ±0.028°
Avg. Response Time 4-7 ms
Switch High reliability aircraft snap acting type. Rated 3 amps, 
Average cycle life - 7 million cycles
Dust Protection Foam collar supplied
Voltage & Current Rating

28Vdc max, 200mA max


Accessories


Product Adaptor Plates Product Adaptor Plates

Cabling Cabling

Links


Link Related Disk Drive Solution
Back to Top