The QS-50 is a dynamically variable collision sensor that operates on an air pressure system.
A regulated air supply provides positive, variable pressure to hold the collision sensor rigid during normal operation. At impact, the air chamber seal is opened, immediately signaling the system controller.
Key Benefits
- Dynamically variable trip points
- Permanent repeatability
- Use on linear actuators, robots, pick-and-place machines
- Detects angular, rotational and compressive forces
| Performance |
Metric |
Imperial |
| Torque Trip Point |
2.2-14.0 N-m |
19-124 in-lb |
| Moment Trip Point |
2.6-11.8 N-m |
23-104 in-lb |
| Mass |
0.29 kg |
0.65 lb |
| Diameter |
71 mm |
2.79 in |
| Profile |
35 mm |
1.37 in |
| Compliance Angle |
±5° |
| Axial Compliance (Z+) |
4.3 mm |
0.169 in |
| Rotary Compliance |
no limit |
| Center of Mass |
20.3 mm |
.80 in |
| Operating Temperature |
0°C min - 70°C max |
| Repeatability |
X&Y: ±0.025 mm
Z: ±0.013 mm
Rotational: ±0.024° |
| Avg. Response Time |
2-6 ms |
| Switch |
High reliability aircraft snap acting type. Rated 3 amps,
Average cycle life - 7 million cycles |
| Dust Protection |
Foam collar supplied |
| Options |
Coolant Resistant Boot |
| UL Rating |
42.4 VDC max.
3 amps max. |
Please log in if you're an existing member or register now.