The QS-400 is a dynamically variable collision sensor that operates on an air pressure system – and an excellent choice for protection in material handling applications.
A regulated air supply provides positive, variable pressure to hold the collision sensor rigid during normal operation. At impact, the air chamber seal is opened, immediately signaling the system controller.
Key Benefits
- Dynamically variable trip points
- Permanent repeatability
- Use on linear actuators, robots, pick-and-place machines
- Detects angular, rotational and compressive forces
| Performance |
Metric |
Imperial |
| Torque Trip Point |
11.8-84.6 N-m |
104-749 in-lb |
| Moment Trip Point |
11.3-63.9 N-m |
100-566 in-lb |
| Mass |
1.3 kg |
2.9 lb |
| Diameter |
122 mm |
4.8 in |
| Profile |
55.5 mm |
2.18 in |
| Compliance Angle |
±5° |
| Axial Compliance (Z+) |
6.6 mm |
0.265 in |
| Rotary Compliance |
no limit |
| Center of Mass |
32.6 mm |
1.29 in |
| Operating Temperature |
0°C min - 100°C max |
| Repeatability |
X&Y: ±0.025 mm
Z: ±0.013 mm
Rotational: ±0.024° |
| Avg. Response Time |
4-8 ms |
| Switch |
High reliability aircraft snap acting type. Rated 3 amps,
Average cycle life - 7 million cycles |
| Dust Protection |
Foam collar supplied |
| Options |
Coolant Resistant Boot
Hi-Temp Skirt Kit |
| Voltage & Current Rating |
28Vdc max, 200mA max |